134 Call Forward Destination Deactivation
LD 18 - Configure Call Forward Destination Deactivation FFC on 16-button DTMF telephone.
Prompt Response Description
REQ NEW CHG Add, or Change 16-button data block.
TYPE ABCD 16-button data block.
TBNO 1-254 Number of ABCD Table to be added or changed.
DFLT 1-254 Number of default function table.
PRED YES Function table is changed for pre-dial.
NO = default mnemonics are used.
- A CFDD Call Forward Destination Deactivation FFC assignment of key.
- B CFWA Call Forward All Call Activation FFC assignment of key.
...
Call Forward Destination Deactivation FFC function can be assigned to any A, B, C or D key of the
16-button DTMF telephone.
ISDN BRI telephones can deactivate the Call Forward All Call feature. To
set up the digital subscriber loop and terminal service profile for a BRI
telephone refer to Overlay 27.
Feature operation
To enable the Call Forward Destination Deactivation feature, complete the
following:
Step Action
1Go off-hook on the "call forward to" Directory Number of the call
forwarded telephone and listen for dial tone.
2Dial the CFDD FFC followed by DN of the call forward originator
and end of dial delimiter.
3Response provided.
—End—
The following responses are provided to the user of the call forwarded
destination.
1. If originator’s call forward DN is the same as active DN of destination
then the call forward feature on originator is deactivated. If the
confirmation tone in LD 57 is enabled, then a confirmation tone or
speech is provided to the destination telephone. Otherwise, silence
is provided.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.