Feature implementation 337
Configuration procedures require that the following conditions are met
before you configure Privacy Override Indicators for a Non-ISDN route:
•CPPO is configurable on COT, DID, FEX, WAT and ISA routes.
•OAPO package 104 is restricted or unequipped.
•Route is either OGT (outgoing) or IAO (incoming and outgoing).
LD 16 - Configure Privacy Override Indicators for a Non-ISDN route.
Prompt Response Description
REQ CHG Change existing data.
TYPE RDB Route Data Block.
CUST xx Customer number, as defined in LD 15
ROUT Route number
0-511 Range for Large System and CS 1000E system.
0-127 Range for Small System and Media Gateway 1000B.
...
CPP YES Calling Party Privacy/Privacy Override (CPP/CPPO) flag.
Enable CPP/CPPO feature and configure parameters.
(NO) = CPP/CPPO feature is disabled is the default.
- TCPP
(NO)
YES
CPP/CPPO flag treatment for an incoming non-ISDN trunk call
tandemed to this trunk route.
Outgoing call will carry the Privacy Override Indicator (default).
Outgoing call will carry the Privacy Indicator.
- DTPI (*67) nnnn Digitone Trunk Privacy Indicator
nnnn = 0-9999, an asterisk (*) can be entered as the first digit.
- DPPI 0-(1167)-9999 Dial-pulse Trunk Privacy Indicator
- DTPO (*82) nnnn Digitone Trunk Privacy Indicator
nnnn = 0-9999, an asterisk (*) can be entered as the first digit.
- DPPO 0-(1182)-9999 Dial-pulse Trunk Privacy Indicator
Configuration procedures require that the following conditions are met before
you set the TCPP flag in RDB to tandem non-ISDN calls on to this route:
•The CPP package 301 is equipped.
•Route is either OGT (outgoing) or IAO (incoming and outgoing).
LD 16 - For an ISDN trunk route, set the TCPP flag in RDB to tandem non-ISDN calls on to
this route.
Prompt Response Description
REQ CHG Change existing data.
TYPE RDB Route Data Block.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.