Nortel Networks NN43001-106 Solicited ANI request

Feature description 475
Solicited ANI request
The solicited ANI request is issued upon a manual request from the Meridian
1 proprietary set using the display key or from the attendant console using
the trace key. The received ANI information is displayed on the display of
the proprietary set or attendant console and it is also used for the CDR, call
trace. If the request is performed using the Trace key, the MCT record is
printed also on the MCT TTY. The system sends the ANI request message
to the CDTI2 card when a user presses the DN key after the set has entered
display mode using the Digit Display key or after the Trace key was pressed.
The CDTI2 card performs the ANI interaction and uploads the received ANI
to the system (see Figure 8 "Manually solicited ANI request" (page 478)).
The ANI is stored in the unprotected trunk data block. The solicited ANI
request may be performed an unlimited number of times during a single
call. Each time, the new ANI replaces the previously received ANI (if there
is one).
When solicited ANI request is initiated using the Trace key, the Malicious
Call Trace feature functionality remains unchanged, the ANI request is
sent in addition to the normal MCT activities. The ANI information, when
received from the card, is also printed on the MCT TTY as MCT ticket.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.