520 CLASS: Calling Number and Name Delivery
Prompt Response Description
- ENTRY aaaa
Xaaaa
Xaaaa Xbbbb
<CR>
aaaa = CLID entry to be configured.
Xaaaa = CLID entry to be deleted.
Xaaaa Xbbbb = CLID entries to be deleted.
aaaa and bbbb must be a value between 0 and (SIZE-1).
The action for the entry is saved to system memory after the
CLID entry has been completely configured. If an existing
CLID entry is changed, the message "ENTRY aaaa SAVED" is
displayed. If a CLID entry or CLID entries is/are deleted, the
message "ENTRY aaaa DELETED" or "ENTRIES aaaa-bbbb
DELETED" is displayed.
...
- LSC 0-9999999
XLocal steering code, 1-7 digits.
X = delete digits.
- - CLASS_F
MT (DN)
LCL
NTN
Send internal DN to a CLASS set as the calling number.
Send local number to a CLASS set as the calling number.
Send National Number to a CLASS set as the calling number.
ENTRY aaaa SAVED
ENTRY aaaa DELETED
ENTRIES aaaa-bbbb DELETED
Displayed message. Refer to the ENTRY prompt description.
...

You may print the CLASS_FMT information included in the CLID using LD

21.

You may print or count the station sets class of service using LD 81. This

information would typically be used for billing purposes, to bill set users for

calls according to the assigned class of service.

LD 10 - Configure the CLASS Calling Name and Calling Number Delivery Class of Service for
Analog (500/2500 type) sets.
Prompt Response Description
REQ: CHG Change existing data.
TYPE: 500 Telephone type.
TN Terminal number
l s c u Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
cu Format for Small System and Media Gateway 1000B where c =
card and u = unit.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.