Feature implementation 465
Prompt Response Description
TYPE: a...a Telephone type. Type ?for a list of possible responses.
TN Terminal number
l s c u Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
cu Format for Small System and Media Gateway 1000B where c =
card and u = unit.
CUST xx Customer number, as defined in LD 15
... ...
CAC_CIS 0-(3)-9 CIS ANI Category Code.
CAC_MFC (0)-10 MFC CNI Category Code.
LD 27 - Configure ANI entry for Basic Rate Interface (BRI) lines.
Prompt Response Description
REQ NEW
CHG
Add new data.
Change existing data.
TYPE TSP Administer Terminal Service Profile on Digital Subscriber Loop.
... ... ...
SPID xxxx Service Profile ID.
DN xxxx ccc Directory Number (DN) and Calling Line
Identification (CLID) entry.
xxxx = DN
ccc = CLID
-CT aaaa Call Types for DN
aaaa = VCE or DTA.
- MCAL 1-(4)-8 Maximum Calls allowed per DN
- CLIP (YES) NO Allow/Deny Calling Line Identification Presentation for incoming
calls.
- PRES (YES) NO Allow/Deny Presentation of CLID to far end on outgoing calls.
- ANIE (0)-N ANI entry. It is of (0)-N where N=S_SIZE in customer data block.
If ANIE=0, no entry is associated with the DN key. The old
mechanism is used for building the ANI message.
If ANIE is 1-N:
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.