426 China - Flexible Feature Codes

Set the Autodial Delay time used by Busy Number Redial.

3. "LD 10 - Allow Busy Number Redial for analog (500/2500 type)

telephones." (page 426)

Allow Busy Number Redial for analog (500/2500 type) telephones.

LD 57 - Configure Flexible Feature Codes for Busy Number Redial.
Prompt Response Description
REQ CHG Change existing data.
TYPE FFC Flexible Feature Codes.
CUST xx Customer number, as defined in LD 15
FFCT (NO) YES Flexible Feature Confirmation Tone.
CODE Change code.
- DEAF xxxx Deactivate Feature.
- BNRA xxxx Busy Number Redial activation code.
- BNRD xxxx Busy Number Redial deactivation code.
LD 15 - Set the Autodial Delay time used by Busy Number Redial.
Prompt Response Description
REQ: CHG Change existing data.
TYPE: FFC Flexible Feature Codes
CUST Customer number
0-99 Range for Large System and CS 1000E system.
0-31 Range for Small System and Media Gateway 1000B.
- ADLD (0)-20 Number of seconds to delay before auto-dialing the saved
busy number (0 will make the feature unavailable). Odd
entries are rounded up to the next even number.
LD 10 - Allow Busy Number Redial for analog (500/2500 type) telephones.
Prompt Response Description
REQ: CHG Change existing data.
TYPE: 500 Telephone type.
TN Terminal number
l s c u Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
cu Format for Small System and Media Gateway 1000B where
c = card and u = unit.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.