590 Context-sensitive soft keys
Call state Action Display
Reorder If an invalid number is dialed, the
reorder state screen appears.
Release and try again
Established (Active)
Call After a call is established there are
two layers of soft keys available.
Press the More key to toggle
between these layers.
Layer 1:
Conf Trans Park More...
Layer 2:
PrivRls Charge CParty
More...

Note: Some soft keys such as the SpcUsr key are not configured by

default. The System Administrator will configure as needed.

Using call features

Table 15
Examples of IP Phone screens in different call states
Feature Action Display
Call Forward Press the Forward key from the
default idle state.
Enter Forward Number appears
on the display line.
Call Forward Number
Edit Enter the forward number. CFWD
Press CFWD or Enter new #
The arrow continues to flash until
you press the >Forwar soft key.
The telephone is returned to the
default idle state of
>Forwar Callers Redial
with an arrow beside >Forwar
After pressing CFW the user has
40 seconds to complete the CFW
otherwise it will timeout.
Cancel Call Forward Press the >Forwar soft key from
the idle screen state.
Call Forward cancelled
Busy A busy tone is received. Destination Busy
Activate RING AGAIN?
Note: The Ring Again feature times
out if the feature is not activated.
The telephone returns to the idle
state.
Ring Again
Activate—screen 1 Press RingAgn.>RingAg Forward Callers
Redial
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.