484 CIS ANI Reception
Prompt Response Description
TYPE RDB Route Data Block.
TKTP DID Direct Inward Dial.
... ... ...
DTRK YES Digital Trunk Route
- DGTP DTI2 Digital Trunk Type
... ... ...
ICOG ICT Incoming Trunk.
... ... ...
CNTL YES Allows change to controls or timers.
TIMR ARD
512-(1024)-2048
ANI Request Duration timer, defines duration of the ANI request
signal. The timer is stored as increments of the 256 ms.
TIMR ATO
2048-(2560)-5120
ANI Timeout timer. Defines how long the system waits for the
ANI information from the CIS CO. If timer expires before the ANI
is uploaded from the CDTI2 card, the system treats the call as it
is defined in the ANI Failure Treatment option.
The ATO should be at least twice as large as the ARD.
CISR YES CIS Route
- CACD The option defines how the CAC is displayed on the display of
the set or console. The option also controls presentation of the
CAC in the messages to the auxiliary processors. The options
are:
(NO)
BEF
AFT
NO = do not display CAC.
BEF= display CAC before ANI.
AFT= display CAC after ANI.
- CACC
(NO)
BEF
AFT
Defines how CAC is stored in CDR.
NO = do not store CAC
BEF = store CAC before ANI
AFT = store CAC after ANI
- AANI The option defines if the Automatic ANI request should be sent
to the CIS CO when the incoming calls are originated from the
CIS CO to the trunks within this route.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.