Feature operation 437
Prompt Response Description
cu Format for Small System and Media Gateway 1000B where
c = card and u = unit.
...
FTR OSP (1) Outgoing call supervision. Answer and disconnect
supervision for outgoing calls with absolute and assumed
answer indication. If the numeric parameter is not entered
and the saved value is null, it is defaulted to 1. Otherwise it
remains unchanged.
OSP 2 Answer and disconnect supervision for outgoing calls with
absolute answer supervision only.
XOSP Enter XOSP to disable battery reversal answer and
disconnect supervision.
LD 10 - Enable hook flash disconnect supervision.
Prompt Response Description
REQ: NEW CHG Add, or change.
TYPE: 500 Telephone type.
TN Terminal number
l s c u Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
cu Format for Small System and Media Gateway 1000B where
c = card and u = unit.
...
FTR ISP 1...(75)...255 Enable hook flash disconnect supervision with flash timer
in 10 millisecond units. If the numeric parameter is not
entered and the saved value is null, it is defaulted to 75.
Otherwise it remains unchanged.
XISP Enter XISP to disable hook flash disconnect supervision.

Respond to the FTR prompt in LD 10 with OSP 1, and then with ISP

1...(75)...255 to enable both battery reversal supervision and hook flash

disconnect supervision.

Feature operation
No specific operating procedures are required to use this feature.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.