Nortel Networks NN43001-106 Set-based conguration

182 Call Forward, Remote (Attendant and Network Wide)
Configure the attendant console RFW key.
7. "LD 15 - Configure the Attendant RCFW password." (page 184)
Configure the Attendant RCFW password.
Set-based configuration
LD 15 - Set the Station Control Password Length.
Prompt Response Description
REQ: CHG Change existing data.
TYPE: FFC Flexible Feature Code
CUST Customer number
0-99 Range for Large System and CS 1000E system.
0-31 Range for Small System and Media Gateway 1000B.
- SCPL 0-8 Station Control Password Length (must be consistent network
wide).
- FFCS YES Change end of dialing digits in FFC.
- - STRL 1-3 Number of digits to indicate FFC end of feature activation.
- - STRG (#) xxx One to three digits to indicate FFC end of a feature activation.
LD 15 - Configure a Special Prefix Number (SPRE) for the customer.
Prompt Response Description
REQ: CHG Change existing data.
TYPE: FTR Features and options
CUST Customer number
0-99 Range for Large System and CS 1000E system.
0-31 Range for Small System and Media Gateway 1000B.
- SPRE xxx Special Prefix Number.
LD 57 - Define Remote Call Forward FFCs and set FFCT.
Prompt Response Description
REQ CHG Change existing data.
TYPE FFC Flexible Feature Codes.
CUST xx Customer number, as defined in LD 15
FFCT (NO) YES Confirmation tone is (is not) to be given after an FFC.
CODE RCFA Remote Call Forward Activate.
RCFA xx xx = RCFA code.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.