212 Call Hold, Permanent
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1. "LD 15 - Enable/disable Permanent Hold reminder ring timer for the
customer." (page 212)
Enable/disable Permanent Hold reminder ring timer for the customer.
2. "LD 10 - Enable/disable Permanent Hold for 2500 telephones." (page
212)
Enable/disable Permanent Hold for 2500 telephones.
LD 15 - Enable/disable Permanent Hold reminder ring timer for the customer.
Prompt Response Description
REQ: CHG Change existing data.
TYPE: TIM Timers.
CUST Customer number.
0-99 Range for Large System and CS 1000E system.
0-31 Range for Small System and Media Gateway 1000B.
- PHDT 1-(30)-63 Permanent Hold reminder ring timing in two-second increments
(that is, 30 = 60 seconds).
LD 10 - Enable/disable Permanent Hold for 2500 telephones.
Prompt Response Description
REQ: CHG Change existing data.
TYPE: 500 Telephone type.
TN Terminal number.
l s c u Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
cu Format for Small System and Media Gateway 1000B where c =
card and u = unit.
CLS XFA Allow transfer.
FTR PHD Enable Permanent Hold.
Feature operation
To place a call on hold, follow these steps:
•While on an active call, flash the switchhook, or press the Link key.
•Dial #4, or the Flexible Feature Code (FFC), if enabled.
•Hang up.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.