Feature implementation 483
Prompt Response Description
FEAT LPTI Loop Timers and additional definitions.
CDTI2 YES CDTI2/CSDTI2 card
... ...
CISFW MFA Multifrequency Shuttle protocol handling + ANI Reception +
Firmware Dial Tone Detection capabilities are supported by the
card.
- MFSL (0)-3 The MFS signals transmission level. The prompt appears when
CISFW is set to MFS or MFA and the CISMFS package is
equipped.
The transmission level may be set to the following values:
0 = -7.3 dB
1 = -5.0 dB
2 = -3.5 dB
3=0dB
- 500L (0)-1 ANI request tone (500 Hz) transmission level. The prompt
appears when CISFW is set to MFA.
The transmission level may be set to the following values:
0 = -7.3 dB
1 = -3.5 dB
LD 14 - Add Calling Number Identification Allowed (CNA) as a class of service for incoming
Direct Inward Dial (DID) CIS DTI2 trunks.
Prompt Response Description
REQ NEW
CHG Add new data.
Change existing data.
TYPE DID Direct Inward Dial trunks.
... ... ...
CLS CNA Class of Service.
Allow Calling Number Identification for incoming CIS DTI2 DID
trunks.
LD 16 - Define the CIS Route.
Prompt Response Description
REQ NEW
CHG Add new data.
Change existing data.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.