224 Call Park

4. "LD 11 - Add or change a Call Park key on Meridian 1 proprietary

telephones." (page 225)

Add or change a Call Park key on Meridian 1 proprietary telephones.

5. "LD 12 - Add or change a Call Park key on attendant consoles." (page

225)

Add or change a Call Park key on attendant consoles.

LD 15 - Enable or disable Call Park.
Prompt Response Description
REQ: CHG Change existing data.
TYPE: FTR Features and options
CUST Customer number
0-99 Range for Large System and CS 1000E system.
0-31 Range for Small System and Media Gateway 1000B.
- OPT CPA Enable Call Park.
LD 50 - Add/change or print Call Park. This overlay must be defined for Call Park operation.
Prompt Response Description
REQ CHG Change existing data.
TYPE CPK Call Park data block.
CUST xx Customer number, as defined in LD 15
CPTM 30-(45)-240
30-(45)-480 Call Park Timer (in seconds).
Call Park recall time (in seconds) if CPRK package 33 is
equipped.
The amount of time a call is held in the parked state before
recalling the parking set or the attendant.
SPDN (0)-50 xxxx Number of contiguous System Park DNs and the first System
Park DN. The default 0 (zero) disables System Park DN
capability, but allows Telephone Park DNs.
If the DN Expansion package is equipped, the System Park DN
can have up to seven digits.
MURT 0-511
0-127
Music route number for parked calls.
For Large Systems
For Small Systems
LD 10 - Allow or deny access to Call Park for analog (500/2500 type) telephones.
Prompt Response Description
REQ: CHG Change existing data.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.