242 Call Party Name Display
Prompt Response Description
- XPLN xx Expected Length.
Range must be between the Input Name length and the MXLN,
or it defaults to DFLN.
<CR> Set XPLN to average default character string length (DFLN) or
the actual length (NAME), whichever is longer.
DCNO xxx IDC conversion table number (0-254).
IDC nnn Existing complete or partial IDC number.
Prompted only when DCNO is valid.
NAME aaaa bbbb CPND name string; maximum of 27 characters.
LD 10 - Allow names to be assigned to analog (500/2500 type) telephones.
Prompt Response Description
REQ: CHG Change existing data.
TYPE: 500 Telephone type.
TN Terminal number
l s c u Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
cu Format for Small System and Media Gateway 1000B where c =
card and u = unit.
FTR CPND Allow CPND name assignment on this telephone.
LD 11 - Allow names to display on Meridian 1 proprietary telephones.
Prompt Response Description
REQ: CHG Change existing data.
TYPE: a...a Telephone type. Type ?for a list of possible responses.
TN Terminal number
l s c u Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
cu Format for Small System and Media Gateway 1000B where c =
card and u = unit.
CLS (CNDD) CNDA
(DNDD) DNDA (Deny) allow display of CPND entries.
(Deny) allow display of CPND originally dialed entries.
LD 12 - Allow names to display on attendant consoles.
Prompt Response Description
REQ: CHG Change existing data.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.