Feature implementation 549
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1. "LD 16 - Enable Collect Call Blocking on a route and configure timers."
(page 549)
Enable Collect Call Blocking on a route and configure timers.
2. "LD 14 - Setup the firmware timing for XFCOT and EXUT cards." (page
550)
Setup the firmware timing for XFCOT and EXUT cards.
3. "LD 15 - Allow Collect Call Blocking for attendants." (page 551)
Allow Collect Call Blocking for attendants.
4. "LD 10 - Enable Collect Call Blocking for analog (500/2500 type)
telephones." (page 551)
Enable Collect Call Blocking for analog (500/2500 type) telephones.
5. "LD 11 - Enable Collect Call Blocking for Meridian 1 proprietary
telephones." (page 551)
Enable Collect Call Blocking for Meridian 1 proprietary telephones.
6. "LD 23 - Enable Collect Call Blocking on ACD queues." (page 552)
Enable Collect Call Blocking on ACD queues.
7. "LD 24 - Enable Collect Call Blocking on DISA blocks." (page 552)
Enable Collect Call Blocking on DISA blocks.
8. "LD 87 - Enable Collect Call Blocking on CDP Steering codes." (page
552)
Enable Collect Call Blocking on CDP Steering codes.
LD 16 - Enable Collect Call Blocking on a route and configure timers.
Prompt Response Description
REQ NEW
CHG Add.
Change.
TYPE RDB Route Data Block.
CUST xx Customer number, as defined in LD 15
ROUT Route number
0-511 Range for Large System and CS 1000E system.
0-127 Range for Small System and Media Gateway 1000B.
TKTP aaa Trunk type. Must be COT, DID, FEX, or WAT for CCB.
...
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.