Nortel Networks NN43001-106 Called Party Control on Internal Calls

305
Called Party Control on Internal Calls
Contents This section contains information on the following topics:
"Feature description" (page 305)
"Operating parameters" (page 305)
"Feature interactions" (page 306)
"Feature packaging" (page 306)
"Feature implementation" (page 307)
"Feature operation" (page 308)
Feature description
The Called Party Control on Internal Calls (CPCI) feature allows the
called party with Class of Service Malicious Call Trace Allowed to activate
Malicious Call Trace (MCT) even after the calling party goes on-hook. When
enabled, the calling party is prevented from releasing a call until the called
party has initially released. If the calling party goes on hook, the call is put
on hold and both parties are given call hold treatment. When the called
party activates the call trace request, the calling party’s information is
printed in the call trace record.
This feature builds on the capabilities of the existing Called Party Disconnect
Control (CPDC) and Malicious Call Trace (MCT) features. Called Party
Control on Internal Calls is applicable on set to set calls and can be
activated during or after a malicious call has occurred.
Operating parameters
The feature is applicable to all systems.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.