480 CIS ANI Reception

ANI Digits in CDR

The ANI digits are placed in the CDR at the place intended for the R2MFC
CNI digits. The CAC may be stored in the CDR together with the ANI digits.
The presentation of the CAC in the CDR is configured at the route data
block level as shown in the dash list below. The CAC may be either:
•placed before the ANI digits
•placed after the ANI digits
•not placed in the CDR
The CDR records containing ANI are generated only if the CDR options are
configured in the customer data block (LD 15) as described in the CDR
technical document.
The feature does not change the CDR output formats. The ANI digits are
stored in the CDR in the same way as the R2MFC CNI digits.
Operating parameters
This feature requires the CIS DTI2 card NTCG01 vintage AC for Large
Systems, and the CIS DTI2 card NTCG02 vintage AC for Small Systems.
Feature interactions

CIS Digital Trunk Interface and CIS Multifrequency Shuttle (MFS)

The feature is based on the CIS DTI2 interface features. The feature
enhances the capabilities of CIS DTI2 but does not change previous
functionality.

Malicous Call Trace (MCT)

The feature allows MCT to receive ANI digits on incoming local CIS DTI2
calls. There is no MCT feature that can be activated from the system on the
CIS CO. When the ANI digits are received from the CO, they are printed
on the MCT TTY and displayed on the display of the set or console that
activated the MCT feature.
Feature packaging
No new package is introduced for this feature. The following packages
are required:
•2 Mbit Digital Trunk Interface (DTI2) package 129
•International Supplementary Features (SUPP) package 131
•Commonwealth of Independent States Trunks (CIST) package 221
•Optional - Malicous Call Trace (MCT) package 107
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.