468 CIS ANI Digits Manipulation and Gateways Enhancements
Prompt Response Description
-MFC_ENT <CR> CAC conversion table to convert MFC CAC into CIS CAC
for use on R2MFC routes.
aa
Xaa
Xaa Xbb
CAC conversion table entry to be created or modified.
CAC conversion table entry to be deleted.
CAC conversion table entries between aa and bb to be
deleted.
<CR> Exit MFC CAC conversion table, gives CIS_ENT prompt.
This prompt is repeated until <CR> is entered.
It is prompted if CACC=YES.
CAC conversion table entries must be between 0 and 31.
For REQ=NEW, only default table 0 is configurable.
An ENTRY can be deleted even if still assigned on an incoming
route.
-- CAC0 0-(3)-9 CIS value corresponding to MFC DGT0
-- CAC1 0-(3)-9 CIS value corresponding to MFC DGT1
-- CAC2 0-(3)-9 CIS value corresponding to MFC DGT2
-- CAC3 0-(3)-9 CIS value corresponding to MFC DGT3
-- CAC4 0-(3)-9 CIS value corresponding to MFC DGT4
-- CAC5 0-(3)-9 CIS value corresponding to MFC DGT5
-- CAC6 0-(3)-9 CIS value corresponding to MFC DGT6
-- CAC7 0-(3)-9 CIS value corresponding to MFC DGT7
-- CAC8 0-(3)-9 CIS value corresponding to MFC DGT8
-- CAC9 0-(3)-9 CIS value corresponding to MFC DGT9
-- DFLT 0-(3)-9 CIS value used when MFC CAC has not been received, or MFC
CAC received is not in the MFC CAC list of this table
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.