606 Controlled Class of Service, Enhanced
Note that this is a toggle: If CCOS is already active, pressing the key
will change the CCOS state to inactive. Check the CCOS lamp to
determine if CCOS is already active.
3Dial the PDN of the telephone to be changed and press CCOS. The
console’s display shows the DN of the changed telephone. A 0 (zero)
is displayed if the telephone is active in the original CCOS mode.
If the telephone does not have CCOS or ECCS active, the console
does not acknowledge that you have successfully entered a valid
CCOS DN.
4To select ECC1, dial # 1.
Note that the octothorpe (#) is required. The console’s display shows
the DN of the changed telephone and a 1.
To select ECC2, dial # 2.
Note that the octothorpe (#) is required. The console’s display shows
the DN of the changed telephone and a 2.
5Press Rls.
—End—
To deactivate Enhanced Controlled Class of Service (ECCS), follow these
steps:
Step Action
1Select an idle loop key.
2Press CCOS.
3Dial the PDN of the telephone to be returned to its original Class of
Service and press CCOS.
4Press Rls.
—End—
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.