462 CIS ANI Digits Manipulation and Gateways Enhancements
Prompt Response Description
X Remove LEC.
- ADDG 0-(8)-99...99 Additional digits used in ANI message if ANIC is NO or if
ANIC=YES but the ANI entry associated with the originator of
the call is not configured.
It is used to complete ANI DN if LEC+ANI DN consists of less
than ANSZ digits.
Prompted for outgoing CIS route.
It can be from 1 digit long up to ANSZ digit long.
- ANDN 0-99...99 Default ANI DN. It can be from 0 digit long up to ANSZ digit long.
Prompted for outgoing CIS route.
Used for building ANI message if ANIC=NO and DN of set is not
allowed to be sent (CLS DNAD).
Also used if ANIC=YES but the ANI entry associated with the
originator of the call is not configured, and DN of set is not
allowed to be sent (CLS DNAD).
X Remove ANDN.
LD 10 - Define ANI entry for analog (500/2500) sets.
Prompt Response Description
REQ: NEW
CHG
Add new data.
Change existing data.
TYPE: 500 500 set.
TN Terminal number
l s c u Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
cu Format for Small System and Media Gateway 1000B where c =
card and u = unit.
CUST xx Customer number, as defined in LD 15
... ... ...
DN xxxx ccc Directory Number, CLID entry.
- MARP (NO) YES Deny/Allow Multi Appearance Redirection Prime.
- CPND aaaa Calling Party Name Display.
- VMB aaaa Voice Mailbox.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.