Feature implementation 307
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1. "LD 15 - Configure Called Party Control on Internal Calls in the
Customer Data Block." (page 307)
Configure Called Party Control on Internal Calls in the Customer Data
Block.
2. "LD 57 - Configure Malicious Call Trace Flexible Feature Code." (page
307)
Configure Malicious Call Trace Flexible Feature Code.
3. "LD 10 - Enable Malicious Call Trace on Analog (500/2500 type) sets."
(page 308)
Enable Malicious Call Trace on Analog (500/2500 type) sets.
4. "LD 11 - Enable Malicious Call Trace on Meridian 1 proprietary sets."
(page 308)
Enable Malicious Call Trace on Meridian 1 proprietary sets.
LD 15 - Configure Called Party Control on Internal Calls in the Customer Data Block.
Prompt Response Description
REQ: CHG Change existing data.
TYPE: FTR Change Features and options.
CUST Customer number
0-99 Range for Large System and CS 1000E system.
0-31 Range for Small System and Media Gateway 1000B.
...
- MCDC YES Malicious Call DN/CLID printing allowed.
CPCI YES Called Party Control on Internal Calls allowed.
NO = Called Party Control on Internal Calls denied.
LD 57 - Configure Malicious Call Trace Flexible Feature Code.
Prompt Response Description
REQ CHG Change existing data.
TYPE FFC Flexible Feature Code data block.
CUST xx Customer number, as defined in LD 15
CODE MTRC Malicious Call Trace Flexible Feature Code.
MTRC xxxx Enter Flexible Feature Code.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.