Feature operation 185
Feature operation

Network Wide Set-based Remote Call Forward

From the remote set dial:
Step Action
1FCC RCFA code.
2SCPW for the set to be forwarded.
3The complete DN of the set to be forwarded. This DN is the full
DN required to call the set to be forwarded from the user’s present
location.
Expected Result: Confirmation tone is delivered to the user.
From the remote set continue dialing:
4The CFW DN to be activated followed by the end of dial indicator (#).
Expected Result: Confirmation tone is delivered to the user.
Error Condition: If an error should occur during set-based RCFW,
the user is presented with an Overflow tone. To remove the error
condition, the user must release from the operation and begin again.
—End—

Attendant-based Remote Call Forward

From the attendant console, perform the following:
Procedure 1
Attendant-based Remote Call Forward
Step Action
1Press an idle loop key followed by the RFW key.
Expected Result: The RFW key is flashing and the Loop key is
steady lit.
2Dial the DN of the set to be forwarded.
Expected Result: If a password is required, the RFW key is winking,
and the console display shows "PWD –". If the console does not
support alpha characters, the display is blank.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.