Nortel Networks NN43001-106 Called Party Disconnect Control, Camp-On, Forced, Centrex Switchhook Flash, Charge Account and Calling Party Name

564 Conference

When a switchhook ﬂash transfers calls on analog (500/2500 type)

telephones with three-party conference (C6A) Class of Service, the

transferring party goes on hook, leaving the other two parties established.

Telephones with a C6A Class of Service involved in a conference having

more than three parties must add the last party to the conference, then ﬂash

the switchhook and go on hook to complete the transfer.

Called Party Disconnect Control

Trunks with Called Party Disconnect Control allowed are treated as trunks

without disconnect supervision when conferenced.

Calling Party Name Display Denied

Call Party Name Display, and thus the Calling Party Name Display Denied

enhancement, do not apply to conference calls.

Calling Party Privacy

The Calling Party Privacy (CPP) feature will pass the Privacy Indicator to the

terminating set to inhibit the display of the Calling Party Name and Number

if the Conference feature is used for the purpose of performing a transfer.

Telephones involved in Conference calls cannot be camped on to. Overﬂow

tone is returned to telephones attempting Forced Camp-On.

Centrex Switchhook Flash (THF) allows conference calls through the CO. It

can be invoked only if there is an established call connected to an outside

trunk. If the telephone is engaged in internal conference calls, THF cannot

be used.

Conference calls produce multiple Call Detail Recording (CDR) records.

Whenever a new trunk is added to a conference, the connection between

the connected telephone and the trunk is recorded, and a connection to the

conference loop is established. This causes CDR to generate a start record

with the telephone and trunk identiﬁed as the involved parties. As trunks are

removed from a conference, CDR end records are produced. These records

may identify different telephones or conferences as the local parties.

China - Attendant Monitor

If any party involved in a monitored call attempts to activate conference,

monitoring is immediately deactivated. With Attendant Monitor active, the

attendant cannot create a conference without ﬁrst disabling the Attendant

Monitor feature.

Nortel Communication Server 1000

Features and Services Fundamentals — Book 2 of 6 (C)

NN43001-106 02.04 Standard

Release 5.5 9 May 2008