Feature packaging 457

CIS Gateways Enhancements

Some changes introduced in CIS ANI digits manipulation feature will impact
on CIS Gateways Enhancements feature. These changes are listed below:
The size of the ANI is configurable on a per outgoing CIS route basis.
Valid responses for LEC, ADDG and ANDN programmed on the
outgoing CIS route are modified.
The additional digit(s) is/are inserted between LEC and ANI DN when
necessary to complete the ANI DN.
Prompt ANIC (ANI Composing) added in LD 16 is also used in CIS
Gateways Enhancements.

CIS Gateways Enhancements feature interactions

CIS Three Wire Trunk Analog

This development interacts with the feature CIS Three Wire Trunk Analog by
changing how ANI is built in case of gateway from ISDN/DPNSS/R2MFC to
CIS Analog.

CIS Digital Trunk Interface

The CIS Gateways Enhancements feature interacts with CIS Digital
Trunk Interface by changing how ANI is built in case of gateway from
ISDN/DPNSS/R2MFC to CIS Digital.

CIS ANI Digits manipulation interaction

These interactions are already described in "CIS ANI Digits Manipulation
feature interactions" (page 456).
Feature packaging
No new packages are introduced for these features.
The existing Commonwealth of Independent States Trunks (CIST) package
221 is required for these features to be operable.
CIS Multi Frequency Shuttle package is required if MF Shuttle signaling is
to be used but is not mandatory for the CIS ANI digits manipulation and
Gateways Enhancements functions.
The CIS DTI2 feature (including MF Shuttle) requires:
Flexible Tones and Cadences (FTC) package 125
International Supplementary Features (SUPP) package 131
2 Mbit Digital Trunk Interface (DTI2) package 129
Flexible Numbering Plan (FNP) package 160
CIS Analog Three Wire Trunks feature requires:
International Supplementary Features (SUPP) package 131
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.