VTrak 15110 User Manual
You can specify additional SCSI TIDs as needed.
7.In the right column, select the LUN for the Console.
8.Repeat steps 1 and 2 for SCSI Channel 2.
9.Click the Submit button when you are done.
TID Settings
The SCSI
Target IDs can be divided into Logical Unit Numbers (LUNs) to extend the number of available addresses. The default TID settings for both SCSI channels is 0. This setting is adequate for most WebPAM and RAID subsystem configurations. If an address conflict occurs, you might have to change the TID setting.
You must have Creation Rights to access this function.
To make settings:
1.Click the Subsystem 
icon.
2.Click on the VTrak 
icon.
3.Click on the SCSI Management 
icon.
4.Click on the TID Settings tab.
5.Select the SCSI Target IDs you want to use on SCSI Channel 1.
6.Select the SCSI Target IDs you want to use on SCSI Channel 2.
7.Click the Submit button when you are done.
Caution
Conflicting ID numbers can prevent WebPAM from connecting to the RAID subsystem and/or cause the SCSI HBA BIOS not to recognize the Logical Drives. Promise offers a sufficient quantity of TIDs and LUNs to avoid any conflict problems.
98
