Promise Technology 15110 user manual Maintenance Activity Monitor, Migrate Disk Array

Chapter 5: Management with the CLU

Maintenance Activity Monitor

The Maintenance Activity Monitor displays the progress of various disk array operations on the CLU screen approximately every 15 seconds, as shown below.

Daniels Array(DA #1) PDM(4->11) 10%

Daniels Array(DA #1) PDM(4->11) 11%

Daniels Array(DA #1) PDM(4->11) 12%

1.Press 1 and Enter to access the Maintenance Activity Monitor.

Maintenance activity monitor is currently running. When any maintenance activity occurs e.g. rebuilding, the maintenance monitor will display notification message on screen.

Stop maintenance activity monitor(y/n)?>y

Maintenance activity monitor stopped now Press Enter key to return

2.Press Y and Enter to toggle the monitor between start and stop.

3.Press Enter to return to the Maintenance menu.

Migrate Disk Array

Use this feature to change the RAID mode (level) or a disk array or to add more physical drives.

1.Type 2 and Enter to access Migrate Logical Drive.

2.Type the ID number for the disk array and press Enter.

*******Physical Drives Selection*******

Id	Name	Capacity
----------------------------------------
7	ST3160023AS	159 GB
8	ST3160023AS	159 GB
9	ST3160023AS	159 GB

Enter Physical Drive ids and/or id ranges separated by commas. For example: 1,5,8-15. Press R to continue after you have finished selecting Physical Drives.

Your input?>7,9

3.Type the ID number(s) for the disk drive(s) you want to add and press Enter.

*******Physical Drives Selection*******

Id	Name Capacity
----------------------------------------
*7	ST3160023AS159 GB

183