Promise Technology 15110 user manual Snmp

Chapter 4: Management with WebPAM PRO

2.Click on the VTrak icon.

3.Click on the Service Management icon.

4.To access SNMP settings, click the SNMP tab or SNMP link.

5.To access Telnet settings, click the Telnet tab or Telnet link. There are no user settings for CIM.

SNMP

The Service Management–SNMP tab enables you to specify SNMP settings. Simple Network Management Protocol (SNMP) is a set of protocols for managing complex networks. SNMP works by sending messages to different parts of a network. SNMP-compliant devices called "agents" store data about themselves in Management Information Bases (MIB) and return this data to the SNMP requesters. Event notifications called "traps" are sent to a destination or "trap sink" specified by an IP address.

To enable SNMP:

1.Click the Subsystem icon.

2.Click on the VTrak icon.

3.Click on the Service Management icon.

4.Click on the SNMP tab.

5.Enter a System Name.

6.Enter a System Location.

7.Enter a System Contact.

8.Enter a name for the Read Community.

9.Enter a name for the Trap Community.

10.Enter a Trap Sink IP address.

11.Click the Update button.

The new trap sink will appear in the list.

12.Click the Submit button when you are done.

To delete a trap sink:

1.In the Trap Sinks list, check the Delete box for the trap sink you want to delete.

2.Click the Delete button.

3.Click the Submit button when you are done.

101