Promise Technology 15110 user manual Scsi Management, LUN Settings

Chapter 4: Management with WebPAM PRO

You can also perform a PDM manually under Disk Array Background Activity.

Note

You must enable Media Patrol and PDM on each disk array.

SCSI Management

• LUN Settings (below) • Statistics (page 99)

•TID Settings (page 98)

The SCSI Management–Information tab lists the SCSI Channels for this subsystem. SCSI Management applies to VTrak 8100, 12100 and 15110.

LUN Settings

The SCSI Management–Console LUN Settings tab enables you make RAID Console and TID LUN settings. This feature applies to VTrak 8100, 12100 and 15110.

The SCSI RAID Console enables in-band SCSI managment of the VTrak subsystem. Neither WebPAM PRO nor the Command Line Utility (CLU) provided with VTrak use in-band SCSI technology. This feature is for future use. For now, leave it DISABLED.

The RAID Console LUN is the Controller's SCSI address. LUN stands for Logical Unit Number. Essentially it is a subdivision of a SCSI Target ID. The default setting for the RAID Console is TID 0, LUN 7. This setting is adequate for most WebPAM and RAID subsystem most configurations. If an address conflict occurs, you might have to change the Console LUN setting.

You must have Creation Rights to access this function.

To make settings:

1.Click the Subsystem icon.

2.Click on the VTrak icon.

3.Click on the SCSI Management icon.

4.Click on the Console LUN Settings tab.

5.Check the Enable LUN Settings box to enable the SCSI RAID Console.

6.For SCSI Channel 1, in the center column, select the SCSI Target ID number under which you want to set the Console LUN.

97