Chapter 4: Management with WebPAM PRO
Logical Drive Alias
The Logical
To specify an alias:
1.Click on the Subsystem icon in Tree View.
2.Click on the VTrak icon.
3.Click on the Disk Arrays icon.
4.Click on the Disk Array icon.
5.Click on the Logical Drives icon.
6.Click on a Logical Drive icon.
7.Click on the Settings tab.
8.Enter an alias in the Alias field.
9.Click the Submit button when you are done.
Physical Drives
Physical drives under a disk array are the same as those listed under the Enclosure except that this list is limited to those physical drives that are used in the disk array. See Physical Drive List (page 107) and Physical Drive (page 108).
Spare Drives
• | Spare Drive List (page 128) | • | Delete a Spare Drive (page 129) |
•Create a Spare Drive (page 128)
In WebPAM PRO, there are two types of hot spare drives:
•Global – Any unassigned physical drive of adequate size can be used as a hot spare drive for any disk array
•Dedicated – A specific unassigned physical drive of adequate size can only be used as the hot spare drive for a specific disk array
The Global hot spare drive option becomes active when you enable Auto Rebuild. See Disk Array Settings (page 119) for this setting. There must also be an unassigned disk drive of adequate capacity to replace the failed drive in the disk array. This means that the hot spare drive must be equal to or larger than the failed drive it replaces.
127