VTrak 15110 User Manual
SMART check: enabled
Initialization: full
Create Logical Drive now(y/n)?>y
4.If you agree with the specifications, press Y and Enter.
If you disagree, press N and Enter. Then select Create New Disk Array (below) and input your own settings.
This completes disk array creation. Go to Disk Array Properties and select Create Logical Drive.
Create New Disk Array
Use this feature to manually build a logical drive to meet your own requirements or to use less than the full number of available disk drives. See page 212 for a discussion of RAID Levels, the number of drives each supports and an explanation of the available options.
1.From the Main menu, press 3 and Enter to access Disk Array Management.
2.Press 2 and Enter to access the Create New Disk Array.
**************Define New Logical Drive************** Total 8 Physical Drives
*********Physical Drives Selection*********
ID NameCapacity
1 | Maxtor 5A250J0 | 251 GB |
3 | WDC | 200 GB |
4 | WDC | 200 GB |
7 | ST380013AS | 80 GB |
9 | WDC | 120 GB |
11 | ST380013AS | 80 GB |
12 | WDC | 120 GB |
Enter Physical Drive IDs and/or ID ranges separated by commas. For example:
Your input?>1,3,4,5,9
3.Choose the physical drives for your logical drive and press Enter.
*********Physical Drives Selection*********
ID NameCapacity
*1 | Maxtor 5A250J0 | 251 GB |
162