Tektronix AWG2005 Data Output, Clock Output, Option, Option, Options A1-A5

Options and Accessories

Options A1-A5

In place of the standard North American, 1109V, 609Hz power cord, Tektronix ships any of five alternate power cord configurations with the waveform generator, as ordered by the customer.

	Table(7*1:)International Power Cords
Option	Power Cord
Option A1	Universal European￿; 2209V, 509Hz
Option A2	United Kingdom￿; 2409V, 509Hz
Option A3	Australian￿; 2409V, 509Hz
Option A4	North American￿; 2409V, 609Hz
Option A5	Switzerland￿; 2209V, 509Hz

Option 02

Option 04

This option provides two additional channels (channel 3 and channel 4). Also, two additional connectors are added on the rear panel (CH3 MARKER OUT and CH4 MARKER OUT). The instrument with Option 02 allows you to simultaneously output four different waveforms.

With Option 04, the waveform generator can provide the following digital signals at the rear panel output connector. This option and Option 09 cannot both be installed.

Data Output

The data (D0-D11) fed to this instrument's internal D/A converter is buffered and connected to the output connector. At the same time that the analog waveform is output, the digital output can be obtained. Output will be at the TTL level.

Clock Output

The same clock that is fed to this instrument's internal D/A converter is buffered in the same way as the data and connected to the connector. As in the case of data output, clock output will be at the TTL level.

Figure 7:1 is a block diagram of the digital data output Option 04.

7￿2 Options