Instructions for Operation
The following steps go through the process of selecting a file and modifying individual output parameters.
1.Push the SETUP button in the MENU column. The SETUP menu in Figure 225 appears.
Figure 2%5:$SETUP Menu
2.Select Waveform Sequence from the bottom menu. Waveform Se2 quence toggles between the CH1 files (upper list) and the CH2 files (lower list).
3.Turn the general purpose knob to highlight a file in the displayed list of files; these are the files currently in internal memory. Then, push ENTER to select the file; the AWG2005 changes to the output parameters associated with the file you selected.
4.After the file is selected, push the front panel VLUE button. Now you can modify output waveform parameters.
5.Setting individual parameters:
Push the SETUP button in the MENU column (if the button is not se2 lected). Now select the appropriate item from the bottom menu; then use the numeric keys or general purpose knob to modify the parameter setting.
214 | Operating Information |