Tektronix AWG2005 manual 41

			Characteristics
		Electrical Characteristics
	Characteristics	Description
		￿uxiliary Input
TRIGGER			External Trig<
			ger Level Ac<
	Accuracy	" (5% of Level + 0.1 V)	curacy
			Check,
	Pulse Width	150 ns minimum
			page 4<39.
	Input Swing	0.2 Vp<p minimum
	Maximum Input Volts	"10 V (DC + peak AC)
	Trigger Hold Off	2 ms + 1 Clock (Excluding ￿utostep mode)
￿M		Sine (512 points), Clock 20 MHz, ￿M, No Filter, Amplitude 5 V,
		No Offset
	Amplitude Accuracy	within 5% (1.9 Vp<p to 2.1 Vp<p for 100% modulation)
	Maximum Input Volts	"5 V (DC + peak AC)
￿dd		Sine (512 points), Clock 20 MHz, ￿dd, No filter, Amplitude 5 V,
		No Offset
	Amplitude Accuracy	Add 5% to the Amplitude Specification
	Maximum Input Volts	"5 V (DC + peak AC)
CONTROL SIG			Master-Slave
	Threshold Level	TTL Level (0.8 V to 2.0 V)	Operation
			Check,
	Pulse Width	40 ns minimum	page 4<44.
	Input Volts	0 V to 5 V
CLOCK			External
	Threshold Level	TTL Level (0.8V to 2.0 V)	CLOCK IN
			Check,
	Rise/Fall Time	within 1 ms	page 4<42.
	Pulse Width	20 ns minimum
	Input Volts	0 V to 5 V
	Frequency Range	1 Hz to 20 MHz

￿WG￿￿￿￿ Service Manual 1￿15