|
|
| Performance Tests |
| Table)4+:*Test Equipment For Optional Check |
| |
|
|
|
|
Item Description | Minimum Requirements | Example | Purpose |
|
|
|
|
Arbitrary | Must use example listed | Tektronix AWG2005 Arbitrary | Used to check mas/ |
Waveform |
| Waveform Generator | |
Generator |
|
|
|
|
|
|
|
Table 4/3 lists the waveform files on the Performance Check disk (063/1706/XX) that are used in these performance tests, the AWG2005 front/panel settings that each file sets up, and the performance test that uses each file.
NOTE
The files on the Performance Check disk are locked (the files names are displayed with *), so the data in these files cannot be changed unless the lock is opened. The file data includes not only waveform data, but also output parameters.
When you select a file with the Waveform Sequence item, the AWG2005 output parameters change to those specified in the file, and the waveform output reflects waveform data in the file. After selecting a file, do not change an output parameter with the SETUP menu unless a procedure instructs you to do so. During the proce, dures, if you are unsure that the AWG2005 settings still match the file's settings, select the waveform again using the Waveform Sequence item on the SETUP menu.
AWG5 Service Manual | 49 |