Alto-Shaam 1008 ,

DELUXE MODEL PROGRAMMING FEATURES

34.

Cooking procedures for items prepared on a regular basis can be stored in memory.

PRESS THE PROGRAM INSTALL/EDIT KEY.

Press the up LLand down MMarrow keys or rotate the adjustment knob until the new procedure

symbol is highlighted in the display.

PRESS THE PROGRAM INSTALL/EDIT KEY TO CONFIRM THE SELECTION.

All cooking mode keys will begin to flash and 01/01 will appear at the top of the

display indicating the first cooking step.

SELEC T AN D PRE SS T HE FI RST REQUI RED C OOKIN G MO DE.

Set cooking mode functions for temperature and time, or internal core temperature. Add any auxiliary functions

along with the moisture venting feature. Follow the basic operating instructions located in this booklet. Auxiliary

functions can be added by pressing the chef function key after entering the operating mode parameters for

each individual step and pressing the up LLand down MMarrow keys or rotating the adjustment knob to select the

auxiliary function required. Press the chef function key to confirm the auxiliary function setting(s) for each step.

PRESS THE PROGRAM INSTALL/EDIT KEY TO CONFIRM THE FIRST STEP.

SELECT AND PRESS THE SECOND REQUIRED COOKING MODE.

The displ ay wi ll i ndica te 02 /02 indic ating the seco nd co oking mod e ste p.

Set all cooking mode functions as indicated above.

PRESS THE PROGRAM INSTALL/EDIT KEY TO CONFIRM THE SECOND STEP.

CONTINUE WITH THE ABOVE INSTRUCTIONS UNTIL ALL MODE STEPS AND FUNCTIONS ARE ENTERED.

UP TO 20 COOKING MODE STEPS CAN BE SAVED IN A SINGLE PROCEDURE.

AFTER ALL FUNCTIONS ARE ENTERED,

PRESS THE PROGRAM INSTALL/EDIT KEY TO CONFIRM THE NEW PROCEDURE.

Name the procedure. Rotate the adjustment knob to select

the first letter of the procedure name. Press the up LLand

down MMarrow key to select second letter position and rotate

the adjustment knob to select the second letter. Continue for

each subsequent alpha character, number, or symbol required.

PRESS THE PROGRAM INSTALL AND EDIT KEY TO CONFIRM THE PROCEDURE NAME.

Rotate the adjustment knob to highlight an unoccupied, numbered memory location within the

programmed menu. If an occupied location is selected, the existing procedure will be

replaced by the new procedure.

PRESS THE PROGRAM INSTALL AND EDIT KEY TO CONFIRM THE PROGRAM INSTALLATION.

The display will indicate “please wait” and will retur n to the main menu display.

—— —— ———

PROGRAM FUNCTION