5) Remove the E-ring and the spring, then
pull out the separation lower guide
toward you and slide it off in the direc-
tion of the arrow.
➀E-ring
➁Spring
➂Separation lower guide
Figure 3-4-15
6) Remove the fixing roller heater following
steps 2-5 on Page 3-18.
7) Remove the thermoswitch following step
3 on Page 3-25.
8) Remove the thermistor following steps
3-4 on Page 3-26.
9) Remove the screw and diode holder.
10) Remove the screw and the right fixing
cover.
➀Screw ➁Diode holder
➂Screw ➃Right fixing rcover
Figure 3-4-16
11) Remove the 2 screws (M3), stepped
screw, and then the left fixing cover.
12) Remove the 4 gears.
➀Screws (M3) ➁Stepped screw
➂Left fixing cover
Figure 3-4-17
3 - 20CHAPTER 3
➀➁
➂
➃
➂➀
➁
➁
➀
➂