APPENDIX

 

Message

 

Meaning

 

Action

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

restart after the continue key is pressed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DISK ALMOST FULL

 

 

Warning message when the Disk is 70+% full.

 

 

Delete pcl/ps, fonts/macros/files

 

 

 

 

 

 

 

 

or format the disk to clear the

 

 

 

 

 

 

 

 

message. The

message

doesn't

 

 

 

 

 

 

 

 

clear with power cycle or COLD

 

 

 

 

 

 

 

 

RESET. This message has lower

 

 

 

 

 

 

 

 

priority than printer error mes-

 

 

 

 

 

 

 

 

sages such as "toner low" or

 

 

 

 

 

 

 

 

"memory overflow".

 

 

 

 

 

 

 

 

 

 

 

 

DISK FULL

 

 

Disk is 95% full. The printer goes offline (also

 

 

Delete pcl/ps, fonts/macros/files

 

 

 

 

 

at power up with a "disk full" installed). If

 

 

or format the disk to clear the

 

 

 

 

 

AUTOCONT is ON, the printer will resume

 

 

message. The

message

doesn't

 

 

 

 

 

back online after 10 seconds. If continue to

 

 

clear with power cycle or COLD

 

 

 

 

 

send files to the disk that larger than the 5%

 

 

RESET. This message has lower

 

 

 

 

 

left on the disk, the files will be flushed or

 

 

priority than printer error mes-

 

 

 

 

 

printed out as text.

 

 

sages such as "toner low" or

 

 

 

 

 

 

 

 

"memory overflow".

 

 

 

 

 

 

 

 

 

 

 

 

READY

 

 

Mopier is activated. ### is the total mopier

 

 

No action required. This message

 

 

# OF ###

 

 

count. # is the increment count up to ###.

 

 

is temporarily displayed for the

 

 

 

 

 

Mopier is only available when the hard disk is

 

 

duration of the printer's process-

 

 

 

 

 

installed.

 

 

ing time. @PJL RDYMSG DISPLAY

 

 

 

 

 

 

 

 

will have higher priority than "#

 

 

 

 

 

 

 

 

OF ###" message.

 

 

 

 

 

 

 

 

 

 

 

 

+ FORMAT FLASH

 

 

A request has been made to format the flash

 

 

Press + to format the flash or

 

 

- IGNORE FLASH

 

 

rom

 

 

press - to ignore the flash. For

 

 

 

 

 

 

 

 

new/unformatted flash: the print-

 

 

 

 

 

 

 

 

er will automatically format the

 

 

 

 

 

 

 

 

flash without any message display

 

 

 

 

 

 

 

 

when the printer is booting up.

 

 

 

 

 

 

 

 

 

 

 

+ REALLY FORMAT

 

 

The operator is being asked to verify the flash

 

 

Press + to verify that the flash is to

 

 

- IGNORE FLASH

 

 

rom formatting is really wanted. This is in

 

 

be formatted or press - to skip for-

 

 

 

 

 

response to the foregoing message.

 

 

matting the flash.

 

 

 

 

 

 

 

 

 

 

 

 

 

FLASH

 

 

This message is displayed while the flash is

 

 

No action required.

 

 

 

FORMATTING...

 

 

being formatted. This message also displays

 

 

 

 

 

 

 

 

 

 

when the printer is booting up with an unfor-

 

 

 

 

 

 

 

 

 

 

matted or bad flash.

 

 

 

 

 

 

 

FLASH FORMAT

 

 

The operator has formatted the flash and the

 

 

Press the Continue key for the

 

 

RESTART

 

 

operation has completed. The system will

 

 

printer to reboot.

 

 

 

 

 

 

restart after the continue key is pressed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FLASH OVERFLOW

 

 

The printer received more fonts/macros data

 

 

Press the Continue key for the

 

 

 

 

 

than it can fit into its FLASH ROM. The print-

 

 

printer to go back to "READY".

 

 

 

 

 

er is "OFFLINE" when this message is dis-

 

 

Formatting

or

deleting

 

 

 

 

 

played.

 

 

Fonts/macros should be per-

 

 

 

 

 

 

 

 

formed to regain more rom space.

 

 

 

 

 

 

 

 

 

 

 

FLASH ERROR

 

 

Error causes by flash format failure, read or

 

 

Printer goes offline. Job will be

 

 

 

 

 

write failure.

 

 

flushed in error occurs while

 

 

 

 

 

 

 

 

receiving data. Turn printer off

 

 

 

 

 

 

 

 

and on. The printer will attempt to

 

 

 

 

 

 

 

 

reformat the flash when it's boot-

 

 

 

 

 

 

 

 

ing up. If the attempt to reformat

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A - 13

Page 225
Image 225
Canon 3260 manual + Format Flash