Canon 3260 manual High-voltage Power Supply Unit, Cassette Paper-size Sensing PCB

CHAPTER 3

G. High-voltage Power Supply Unit

1)Remove the right rear and rear covers.

2)Disconnect the 2 connectors.

3)Remove the screw (M4), the 2 screws (M3), and then the high-voltage power supply unit.

➁

➃

➂➀

➀Connectors

➁ Screws (M4)

➂ Screws (M3)

➃ High-voltage power supply unit

Figure 3-8-16

H. Cassette Paper-size Sensing PCB

1)Remove the cassettes.

2)Remove the power supply following steps 1-7 on Page 3-48.

3)Disconnect the connector, remove the screw, then take out the cassette paper- size sensing cover.

➁

➂

➀

➀Connector

➁ Screw

➂ Cassette paper-size sensing cover

Figure 3-8-17

4)Disconnect the connector and remove the 3 screws from each PCB, then take out the cassette-size sensing PCBs.

➀➁

➀ ➁ ➂

➃

➀Connectors

➁ Screws

➂ Upper-cassette paper-size sensing PCB

➃ Lower-cassette paper-size sensing PCB

Figure 3-8-18

3 - 47