A - 14
APPENDIX
####
+TO CONFIRM/-
CANCEL
READY
TONER LOW
TONER CART
MISSING
PRINTING TO STD
TRAY
LOAD <MEDIA>
<SIZE> IN <TRAY>
Where #### = MAILBOX, JOB SEPARATION,
STACKER, or SORTING. The operator is being
asked to confirm the mode change in the
sorter is really wanted. This is in response to
the foregoing message.
Toner is low.
Toner cartridge is missing.
Display (for the duration that the printer takes
to process the job) when the bin(s) in the
sorter are full and the output is directed to the
standard tray.
Load the specified tray with paper size.
Size:
LETTER - Letter paper size.
LEGAL - Legal paper size.
11X17 - Ledger paper size.
A3 - A3 paper size.
A4 - A4 paper size.
A5 - A5 paper size.
11x17 paper size.
EXEC - Executive paper size.
COM10 - Commercial #10 envelope.
MONARCH - Monarch envelope.
DL - DL envelope.
C5 - C5 envelope.
B5JIS - B5 paper size.
B5ISO - B5 envelope.
B4 - B4 paper size.
CUSTOM - Custom paper size.
ANY - Unknown paper size.
Tray:
UPPER - Internal upper cassette.
LOWER - Internal lower cassette.
DECK - 2000 sheet Large Capacity tray.
DECK1 - Upper cassette of 2x500 deck.
DECK2 - Lower cassette of 2x500 deck.
MPT - Multi-purpose tray.
ENV. - Envelope feeder.
ANY TRAY - any paper tray that can support
Letter, Legal, B4 or A4
the flash fails, FLASH ERROR will
be displayed. Remove the faulty
flash rom and replace with new
flash.
Press + to accept (confirm) the
mode change in the sorter or
press - to cancel the mode
change.
Replace the toner cartridge as
soon as possible. The printer will
continue to operate, but the
images will degrade.
Add toner cartridge.
No action required.
The specified tray must be loaded
with the specified paper size and
media type.
Depending upon circumstances,
the Continue key may be required
to continue the job. If the printer
is printing and a tray runs out of
paper, for instance, simply load-
ing the tray and closing it will
cause the printer to continue nor-
mally. If, however, the printer
does not contain the required
paper size or media type, the user
must select/change the media
type from front panel. Open the
tray and load the appropriate
media type/paper size into the
specified tray. The printer will
resume printing after the tray is
reinstalled. In the case of manual
feed (discussed following), the
Continue key must always be
pressed.
Message Meaning Action