Canon 3260 manual Set Up

CHAPTER 4

Table 4-8-7

Mode select 8

bit	Display content details
16	Initial residual jam

2Electrical unit fan malfunction

1Fixing unit fan malfunction

SET UP

Pick-up slot			Delivery slot		Print	Image pattern
					mode
bit 8	bit 7	bit 6	bit 5	bit 4	bit 3	bit 2	bit 1
0	0	0						Lower cassette pick-up
0	0	1						Upper cassette pick-up
0	1	0						Multi-purpose tray pick-up
0	1	1						Envelope feeder pick-up
			0	0				Face-down tray delivery
			0	1				Face-up tray delivery
					0			Single side print
					1			Duplex print
						0	0	Vertical lines
						0	1	Horizontal lines
						1	0	All-white
						1	1	All-black

			Table 4-8-8
Mode select 3
	bit		Display Content Details/ Set Up Content Details
	16	Lights when the upper cassette pick-up function is ready in the printer
	2
		Lights when there are envelopes loaded in the envelope feeder.
	1	Lights when paper is present at the re-feed position
	8	RDYINH set (Note 1)
S	7
	6	Forced laser emission (WX only)
E
	5
T
U	4	Service mode (1: start, 0: stop) (72X only)
	3	Display panel light up test (WX only)
P
	2	Sleep mode (1: deep mode, 0: nap mode) (Note 2)
	1	Sleep set (Note 3)

Notes: 1. When performing the ready inhibit setting, set MODE SELECT to "3" and turn ON the printer while pressing the ENTER switch.

2.Deep mode halts all drives. (stop +24V supply) Nap mode halts all drives except the fan motor.

3.The sleep mode setting can not be released. When releasing, turn the printer power ON/OFF again.

4 - 46