Cisco Systems 8.6 manual Feature and Services Guide, Intercom, See Cisco Unified Communications

Chapter 5 Configuring Features, Templates, Services, and Users

Telephony Features Available for the Cisco Unified IP Phone

Table 5-1	Telephony Features for the Cisco Unified IP Phone (continued)
Feature		Description	Configuration Reference
Intercom		Allows users to place and receive intercom calls	Cisco Unified Communications Manager
		using programmable phone buttons. You can	Feature and Services Guide, Intercom.
		configure intercom line buttons to:
		• Directly dial a specific intercom extension.
		• Initiate an intercom call and then prompt the
		user to enter a valid intercom number.
		Note If your user logs into the same phone on a
		daily basis using their Cisco Extension
		Mobility profile, assign the phone button
		template that contains intercom
		information to their profile, and assign the
		phone as the default intercom device for
		the intercom line.
Join/Select		Allows a user to join two or more calls that are on	For more information:
		one line to create a conference call and remain on	• See Configuring Softkey Templates,
		the call.
				page 5-27.
			• See Cisco Unified Communications
				Manager System Guide, Cisco Unified IP
				Phones.
Join Across		Allows users to apply the Join feature to calls that	For more information:
Lines/Select		are on multiple phone lines.	• See the Configuring Softkey Templates,
				page 5-27.
			• See Cisco Unified Communications
				Manager System Guide, Cisco Unified IP
				Phones.
Line select		If this feature is disabled (default), then the ringing	For more information, see the option “Always
		line is selected. When enabled, the primary line is	use prime line” in the following chapters of
		picked up even if a call is ringing on another line.	Cisco Unified Communications Manager
		The user must manually select the other line.	Administration Guide:
		Note This feature can also be enabled or	•	Device Profile Configuration
		disabled for Extension Mobility.	• Common Phone Profile Configuration
			• Cisco Unified IP Phone Configuration
Line select for voice		When disabled (default), pressing the Messages	For more information, see the option “Always
messages		button selects the line that has a voice message. If	use prime line for voice message” in the
		more than one line has voice mail, then the first	following chapters of Cisco Unified
		available line is selected. When enabled, the	Communications Manager Administration
		primary line is always used to retrieve voice	Guide:
		messages.	•	Device Profile Configuration
		Note This feature can also be enabled or	• Common Phone Profile Configuration
		disabled for Extension Mobility.
			• Cisco Unified IP Phone Configuration

	Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-23091-01		5-13