Cisco Systems 8.6 Preferences Audio Preferences, Wideband Handset, User Preferences Audio

Chapter 4 Configuring Settings on the Cisco Unified IP Phones

Device Configuration Menu

Table 4-15	Media Configuration Menu Options (continued)
Option		Description			To Change
Recording Tone			Indicates the length of time in milliseconds for		From Cisco Unified Communications Manager
Duration			which the beep tone plays.		Administration, choose Device > Phone > Phone
			If the value you configure here is less than one		Configuration.
			third the interval, then this value overrides the
			default provided by the Network Locale.
			Range: 0 to 3000
			Note For some Network Locales that use a
				complex cadence, this setting applies
				only to the first beep tone.
			See also: Recording Tone
Wideband Handset			Indicates whether wideband is enabled or		• If Wideband Handset UI Control is enabled,
			disabled for the handset.		you or the user can choose	> User
			Default: “Use Phone Default” on Cisco Unified		Preferences > Audio Preferences >
					Wideband Handset.
			Communications Manager Administration.
			(This default means that the phone will be		• If Wideband Handset UI Control is disabled,
			enabled for a wideband handset only if the		use Cisco Unified Communications Manager
			phone was shipped with a wideband handset.)		Administration and choose Device > Phone >
					Phone Configuration to set this value.
					Note If you allow this option to be user
					controllable (in the Wideband Handset UI
					Control option), the user-configured value
					takes precedence.
Wideband Headset			Indicates whether wideband is enabled or		• If Wideband Headset UI Control is enabled,
			disabled for the headset.		you or the user can use the phone and choose
			Default: Disabled		> User Preferences > Audio
					Preferences > Wideband Headset.
					• If Wideband Headset UI Control is disabled,
					use Cisco Unified Communications Manager
					Administration, choose Device > Phone >
					Phone Configuration to set this value.
					Note If you allow this option to be user
					controllable (in the Wideband Headset UI
					Control option), the user-configured value
					takes precedence.

	Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
4-30	OL-23091-01