Appendix E Basic Phone Administration Steps

Configuring the Phone

Calling Search Space—From the drop-down list box, choose the appropriate calling search space (CSS). A calling search space comprises a collection of partitions (analogous to a collection of available phone books) that are searched to determine how a dialed number should be routed. The calling search space for the device and the calling search space for the directory number get used together. The directory number CSS takes precedence over the device CSS.

Note Calling Search Spaces are defined on the Calling Search Space Configuration window of Cisco Unified Communications Manager Administration (Calling routing > Class of Control> Calling Search Space). You can use the search fields in conjunction with the Find button to find all configured Calling Search Spaces and their current settings.

Location—Choose the appropriate location for this Cisco Unified IP Phone.

Owner User ID—From the drop-down menu, choose the user ID of the assigned phone user.

b.In the Protocol Specific Information pane of this window, choose a Device Security Profile from the drop-down list. To enable security features for a phone, you must configure a new security profile for the device type and protocol and apply it to the phone. If the phone does not support security, choose a non-secure profile.

To identify the settings that are contained in the profile, choose System > Security Profile > Phone Security Profile.

Note The security profile chosen should be based on the overall security strategy of the company.

c.(For SIP Phones only) Also in the Protocol Specific Information pane of this window, choose the applicable SIP Profile from the drop-down list.

d.In the Extension Information pane of this window, check the Enable Extension Mobility box if this phone supports Cisco Extension Mobility.

e.In the Product Specific Configuration Layout pane of this window, enable the Video Capabilities field if this field appears on your window.

f.Click Save.

Step 2 Configure line settings:

a.On the Phone Configuration window, click Line 1 on the left pane of the window. The Directory Number Configuration window appears.

b.In the Directory Number field, enter a valid number that can be dialed.

Note This field should contain the same number that appears in the Telephone Number field on the User Configuration window.

Example: 26640 is the directory number of user John Doe in the example above.

c.From the Route Partition drop-down list, choose the partition to which the directory number belongs. If you do not want to restrict access to the directory number, choose <None> for the partition.

Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)

 

OL-23091-01

E-5

 

Page 235
Image 235
Cisco Systems 8.6 manual OL-23091-01