Chapter 5 Configuring Features, Templates, Services, and Users

Telephony Features Available for the Cisco Unified IP Phone

Table 5-1

Telephony Features for the Cisco Unified IP Phone (continued)

 

 

 

 

Feature

 

Description

Configuration Reference

 

 

 

 

Automatic Port

 

When the Cisco Unified CM administrator uses the

To configure the parameter in the Cisco

Synchronization

 

Remote Port Configuration feature to set the speed

Unified CM Administration application,

 

 

and duplex function of an IP Phone remotely, loss

choose Device > Phone, select the appropriate

 

 

of packets can occur if one port is slower than the

IP Phones, and scroll to the Product Specific

 

 

other.

Configuration Layout pane.

 

 

The Automatic Port Synchronization feature

To configure the setting on multiple phones

 

 

synchronizes the ports to the lowest speed among

simultaneously, enable Automatic Port

 

 

the two ports, which eliminates packet loss. When

Synchronization in the Enterprise Phone

 

 

automatic port synchronization is enabled, it is

Configuration (System > Enterprise Phone

 

 

recommended that both ports be configured for

Configuration).

 

 

autonegotiate. If one port is enabled for

 

 

 

autonegotiate and the other is at a fixed speed, the

 

 

 

phone synchronizes to the fixed port speed.

 

 

 

Note If both the ports are configured for fixed

 

 

 

speed, the Automatic Port Synchronization

 

 

 

feature is ineffective.

 

 

 

Note The Remote Port Configuration and

 

 

 

Automatic Port Synchronization features

 

 

 

are compatible only with IEEE 802.3AF

 

 

 

Power of Ethernet (PoE) switches.

 

 

 

Switches that support only Cisco Inline

 

 

 

Power are not compatible. Enabling this

 

 

 

feature on phones that are connected to

 

 

 

these types of switches could result in loss

 

 

 

of connectivity to Cisco Unified CM, if the

 

 

 

phone is powered by PoE.

 

 

 

 

Barge (and cBarge)

Allows a user to join a non-private call on a shared

For more information, see:

 

 

phone line. Barge features include cBarge and

Cisco Unified Communications Manager

 

 

Barge.

 

 

Administration Guide, Cisco Unified IP

 

 

 

 

 

cBarge adds a user to a call and converts it into

Phone Configuration.

 

 

a conference, allowing the user and other

Cisco Unified Communications Manager

 

 

parties to access conference features.

 

 

System Guide, Cisco Unified IP Phones.

 

 

 

 

 

Barge adds a user to a call but does not convert

Cisco Unified Communications Manager

 

 

the call into a conference.

 

 

Features and Services Guide, Barge and

 

 

 

 

 

The phones support Barge in two conference

Privacy.

 

 

modes:

 

 

 

Built-in conference bridge at the target device

 

 

 

(the phone that is being barged). This mode

 

 

 

uses the Barge softkey.

 

 

 

Shared conference bridge. This mode uses the

 

 

 

cBarge softkey.

 

 

 

 

Block external to

Prevents users from transferring an external call to

For more information, see Cisco Unified

external transfer

 

another external number.

Communications Manager Features and

 

 

 

Services Guide, External Call Transfer

 

 

 

Restrictions.

 

 

 

 

Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)

5-4

OL-23091-01

 

 

Page 124
Image 124
Cisco Systems 8.6 manual Configuration System Enterprise Phone, Services Guide, External Call Transfer, Restrictions