Cisco Systems 8.6 manual Performing Final End User Configuration Steps, Procedure

Appendix E Basic Phone Administration Steps

Performing Final End User Configuration Steps

–Select the device, then click Save Selected/Changes. The user is now associated with the device.

–Click the Go button next to the “Back to User” Related link in the upper-right corner of the screen.

l.Proceed to Performing Final End User Configuration Steps, page E-7.

Performing Final End User Configuration Steps

If you are not already on the End User Configuration page, choose User Management > End User to perform some final configuration tasks. Use the Search fields and the Find button to locate the user (for example, John Doe), then click on the user ID to get to the End User Configuration window for the user.

In the End User configuration window, do the following:

Procedure

Step 1 In the Directory Number Associations pane of the screen, set the primary extension from the drop-down list.

Step 2 In the Mobility Information pane, check the Enable Mobility box.

Step 3 In the Permissions Information pane, use the User Group buttons to add this user to any user groups. For example, you may want to add the user to a group that has been defined as a Standard CCM End User Group.

To view all configured user groups, choose User Management > User Group.

Step 4 Click Save.

Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)

OL-23091-01 E-7