7-4
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-23091-01
Chapter 7 Monitoring the Cisco Unified IP Phones Remotely
Configuring the Cisco Unified IP Phone to use HTTP/HTTPS Protocols
Configuring the Cisco Unified IP Phone to use HTTP/HTTPS Protocols
The Cisco Unified IP Phone can be configured to use:
• The HTTPS protocol only—Phone web access uses https://IP_address
• The HTTP or HTTPS protocols—Phone web access uses http://IP_address or https://IP_address
Device Information
The Device Information area on a phone’s web page displays device settings and related information for
the phone. Table 7-1 describes these items.
To display the Device Information area, access the web page for the phone as described in the Accessing
the Web Page for a Phone, page 7-2, and then click the Device Information hyperlink.
Tab l e 7-1 Device Information Area Items
Item Description
MAC Address Media Access Control (MAC) address of the phone
Host Name Unique, fixed name that is automatically assigned to the phone based on the MAC address
Phone DN Directory number assigned to the phone
App Load ID Identifier of the firmware running on the phone
Boot Load ID Identifier of the factory- installed load running on the phone
Vers i o n Version of the firmware running on the phone
Expansion Module 1 Phone load ID for the first Cisco Unified IP Phone Expansion Module, if connected to the phone
Expansion Module 2 Phone load ID for the second Cisco Unified IP Phone Expansion Module, if connected to the phone
Hardware Revision Revision value of the phone hardware
Serial Number Serial number of the phone
Model Number Model number of the phone
Message Waiting Indicates if there is a voice message waiting on any line for this phone
UDI Displays the following Cisco Unique Device Identifier (UDI) information about the phone:
• Device Type—Indicates hardware type. For example, phone displays for all phone models
• Device Description—Displays the name of the phone associated with the indicated model type
• Product Identifier—Specifies the phone model
• Version Identifier—Represents the hardware version of the phone
The Version Identifier field might display a blank screen if the user is using an older model Cisco
Unified IP Phone, because the hardware does not provide this information.
• Serial Number—Displays the unique serial number of the phone
Time Time obtained from the Date/Time Group in Cisco Unified Communications Manager to which the
phone belongs