Chapter 4 Configuring Settings on the Cisco Unified IP Phones

Network Configuration Menu

Table 4-2 Network Configuration Menu Options (continued)

Option

Description

To Change

 

 

 

 

Domain Name

Name of the Domain Name System (DNS) domain in

1.

Unlock network configuration

 

which the phone resides.

 

options.

 

Note If the phone receives different domain names from

2.

Disable DHCP.

 

the DHCPv4 and DHCPv6 servers, the domain

 

If the IP Addressing mode is

 

name from the DHCPv6 will take precedence.

 

 

 

configured for IPv4 only, set the

 

 

 

 

 

 

DHCP option to No.

 

 

 

If the IP Addressing mode is

 

 

 

configured for IPv6 only, set the

 

 

 

DHCPv6 option to No.

 

 

 

If the IP Addressing mode is

 

 

 

configured for both IPv4 and

 

 

 

IPv6, set both DHCP option and

 

 

 

DHCPv6 to No.

 

 

3. Scroll to the Domain Name

 

 

 

option, press the Edit softkey,

 

 

 

and then enter a new domain

 

 

 

name.

 

 

4. Press the Validate softkey and

 

 

 

then press the Save softkey.

 

 

 

Operational VLAN ID

Auxiliary Virtual Local Area Network (VLAN)

The phone obtains its Operational

 

configured on a Cisco Catalyst switch in which the phone

VLAN ID via Cisco Discovery

 

is a member.

Protocol (CDP) from the switch to

 

If the phone has not received an auxiliary VLAN, this

which the phone is attached. To

 

assign a VLAN ID manually, use the

 

option indicates the Administrative VLAN.

 

Admin VLAN ID option.

 

If neither the auxiliary VLAN nor the Administrative

 

 

 

 

VLAN are configured, this option is blank.

 

 

 

 

 

 

Admin. VLAN ID

Auxiliary VLAN in which the phone is a member.

1.

Unlock network configuration

 

Used only if the phone does not receive an auxiliary

 

options.

 

 

 

 

VLAN from the switch; otherwise it is ignored.

2. Scroll to the Admin. VLAN ID

 

 

 

option, press the Edit softkey,

 

 

 

and then enter a new Admin

 

 

 

VLAN setting.

 

 

3. Press the Validate softkey and

 

 

 

then press the Save softkey.

 

 

 

 

Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)

 

OL-23091-01

4-7

 

 

 

Page 79
Image 79
Cisco Systems 8.6 manual Option Description To Change