Cisco Systems 8.6 manual Option Description To Change

Chapter 4 Configuring Settings on the Cisco Unified IP Phones

Network Configuration Menu

For information about the keys you can use to edit options, see Editing Values, page 4-3.

Table 4-2 Network Configuration Menu Options

Option	Description	To Change
IPv4 Configuration	Internet Protocol v4 address menu.	1.	Unlock network configuration
	In the IPv4 Configuration menu, you can do the		options.
	following:	2. Scroll to IPv4 Configuration and
	• Enable or disable the phone to use the IPv4 address		press the Select softkey.
	that is assigned by the DHCPv4 server.
	• Manually set the IPv4 Address, Subnet Mask, Default
	Routers, DNSv4 Server, and Alternate TFTP servers
	for IPv4.
	For more information on the IPv4 address fields, see the
	specific field within this table.
IPv6 Configuration	Internet Protocol v6 address menu.	1.	Unlock network configuration
	In the IPv6 Configuration menu, you can do the		options.
	following:	2. Scroll to IPv6 Configuration and
	• Enable or disable the phone to use the IPv6 address		press the Select softkey.
	that is assigned by the DHCPv6 server or to use the
	IPv6 address that it acquires through Stateless
	Address Autoconfiguration (SLAAC).
	• Manually set the IPv6 Address, Subnet Prefix Length,
	DNSv6 Server, and IPv6 TFTP Servers.
	For more information on the IPv6 address fields, see
	Table 4-4.
	For more information on SLAAC, see Deploying IPv6 in
	Unified Communications Networks with Cisco Unified
	Communications Manager.
mac address	Unique Media Access Control (MAC) address of the	Display only—Cannot configure.
	phone.
Host Name	Unique host name that the DHCP server assigned to the	Display only—Cannot configure.
	phone.

Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)

4-6 OL-23091-01