Cisco Systems 8.6 manual Configuration Window Path Parameters, Device Device Settings, Rtcp

Chapter 5 Configuring Features, Templates, Services, and Users

Configuring Product Specific Configuration Parameters

Table 5-2	Configuration parameters for Cisco Unified IP Phones
Configuration Window		Path	Parameters
Enterprise Phone		System > Enterprise Phone	You can set the following parameters
Configuration window		Configuration	in any of the three configuration
			windows:
Common Phone Profile		Device > Device Settings >
window		Common Phone Profile	•	Settings Access
Phone Configuration		Device > Phone; Product	•	Video Capabilities
window		Specific Configuration portion	•	Web Access
		of window
			•	Load Server
			•	RTCP
			•	Peer Firmware Sharing
			• Cisco Discovery Protocol (CDP):
				Switch Port
			• Cisco Discovery Protocol (CDP):
				PC Port
			• Link Layer Discovery Protocol -
				Media Endpoint Discover
				(LLDP-MED): Switch Port
			• Link Layer Discovery Protocol
				(LLDP): PC Port
			•	IPv6 Load Server
			•	802.1x Authentication
			• Switch Port Remote Configuration
			• PC Port Remote Configuration
			•	Automatic Port Synchronization
			When you set the parameters, select
			the Override Common Settings check
			box for each setting you wish to
			update. If you do not check this box,
			the corresponding parameter setting
			does not take effect. If you set the
			parameters at the three configuration
			windows, the setting takes precedence
			in the following order:
			•	Phone Configuration window
			• Common Phone Profile window
			•	Enterprise Phone Configuration
				window

	Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-23091-01		5-23