Cisco Systems 8.6 manual Configuration menu. a new, From the new Tftp Server

Chapter 4 Configuring Settings on the Cisco Unified IP Phones

Network Configuration Menu

Table 4-3	IPv4 Configuration Menu Options (continued)
Option		Description	To Change
TFTP Server 2		Optional backup TFTP server that the phone with an IPv4	1. Unlock the CTL or ITL files if
		address uses if the primary TFTP server is unavailable.	necessary (for example, if you
		If neither the primary TFTP server nor the backup TFTP	are changing the administrative
			domain of the phone). If the CTL
		server is listed in the CTL or ITL files on the phone, you
			and ITL files both exist, unlock
		must unlock the file before you can save changes to the
			either file.
		TFTP Server 2 option. In this case, the phone will delete
		the file when you save changes to the TFTP Server 2	2. Unlock network configuration
		option. A new CTL file or ITL file will be downloaded	options.
		from the new TFTP Server 2 address.	3. Enter an IP address for the TFTP
		When the phone looks for its TFTP server, it gives	Server 1 option.
		precedence to manually assigned TFTP servers, regardless	4. Scroll to the TFTP Server 2
		of the protocol. If your configuration includes both IPv6
			option, press the Edit softkey,
		and IPv4 TFTP servers, the phone prioritizes the order that
			and then enter a new backup
		it looks for its TFTP server by giving priority to manually
			TFTP server IP address.
		assigned IPv6 TFTP servers and IPv4 TFTP servers. The
			5. Press the Validate softkey, and
		phone looks for its TFTP server in the following order:
		1. Manually assigned IPv6 TFTP servers	then press the Save softkey.
			Note If you forgot to unlock the
		2. Manually assigned IPv4 TFTP servers
			CTL file, you can change the
		3. DHCPv6 assigned TFTP servers	TFTP Server 2 address in the
		4. DHCP assigned TFTP servers	CTL file, then erase the CTL
			file by pressing the Erase
		Note For information about the CTL and ITL files, see
			softkey from the Security
		Cisco Unified Communications Manager Security	Configuration menu. A new
		Guide. For information about unlocking CTL and	CTL file will be downloaded
		ITL files, see Unlocking the CTL and ITL Files,	from the new TFTP Server 2
		page 4-41	address.
BOOTP Server		Indicates whether the phone obtains its configuration from	Display only—Cannot configure.
		a Bootstrap Protocol (BootP) server instead of from a
		DHCP server.

	Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-23091-01		4-13